{"title":"Tony Kart","description":null,"products":[{"product_id":"otk-genuine-50mm-sprocket-carrier","title":"OTK Genuine 50mm Sprocket Carrier","description":"\u003cp\u003eThe \u003cstrong\u003eOTK Genuine 50mm Sprocket Carrier\u003c\/strong\u003e (OTK part number 0047.FA) is a genuine OTK magnesium sprocket hub designed for compatible OTK-based kart chassis using a 50mm rear axle. It is used to mount the rear sprocket to the axle and maintain correct drive alignment between the engine, chain and rear axle assembly. Sold individually as a genuine OTK spare part.\u003c\/p\u003e\n\n\u003cp\u003eCorrect sprocket carrier fitment is fundamental to reliable kart performance. The sprocket carrier positions the rear sprocket on the axle and determines chain line, which directly affects drive efficiency, chain wear and overall chassis behaviour. Using the correct genuine OTK carrier for your axle diameter and chassis specification ensures the sprocket is held securely, the chain runs true and the drive system operates as intended. An incorrect or worn carrier can cause chain misalignment, premature wear and potential mechanical failure during a session.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine OTK spare part\u003c\/li\u003e\n\u003cli\u003eOTK part number: 0047.FA\u003c\/li\u003e\n\u003cli\u003eMagnesium construction for strength and low weight\u003c\/li\u003e\n\u003cli\u003e2-bolt \/ 2-screw fixing design for secure sprocket retention\u003c\/li\u003e\n\u003cli\u003eDouble-sided design allowing installation in different orientations\u003c\/li\u003e\n\u003cli\u003e50mm diameter — designed for 50mm rear axles\u003c\/li\u003e\n\u003cli\u003eMaintains correct chain line between engine, chain and rear axle assembly\u003c\/li\u003e\n\u003cli\u003eSold individually\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: OTK\u003c\/li\u003e\n\u003cli\u003ePart number: 0047.FA\u003c\/li\u003e\n\u003cli\u003eType: Sprocket carrier \/ sprocket hub\u003c\/li\u003e\n\u003cli\u003eMaterial: Magnesium\u003c\/li\u003e\n\u003cli\u003eAxle diameter: 50mm\u003c\/li\u003e\n\u003cli\u003eFixing: 2-bolt \/ 2-screw\u003c\/li\u003e\n\u003cli\u003eDesign: Double-sided\u003c\/li\u003e\n\u003cli\u003eQuantity: Sold individually\u003c\/li\u003e\n\u003cli\u003eSprocket, chain, sprocket protector, axle, axle keys and fittings are not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment note:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis sprocket carrier is designed for compatible OTK-based kart chassis using a 50mm rear axle. Before ordering, customers must verify the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChassis model and manufacturer\u003c\/li\u003e\n\u003cli\u003eRear axle diameter (50mm required)\u003c\/li\u003e\n\u003cli\u003eSprocket type and chain pitch\u003c\/li\u003e\n\u003cli\u003eChain line and engine class requirements\u003c\/li\u003e\n\u003cli\u003eAxle keyway specification\u003c\/li\u003e\n\u003cli\u003eExisting sprocket carrier part number and specification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis part is not suitable for every kart. It is intended for compatible OTK-based chassis where part number 0047.FA and the 50mm specification are confirmed correct.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSetup note:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a double-sided 2-screw sprocket hub. Depending on engine type and setup, the carrier may be installed in different orientations to achieve the correct chain line. Customers should follow OTK setup guidance or consult their mechanic if unsure of the correct installation orientation for their application.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIdeal for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTony Kart chassis using a 50mm rear axle\u003c\/li\u003e\n\u003cli\u003eKosmic chassis using a 50mm rear axle\u003c\/li\u003e\n\u003cli\u003eLN Kart chassis using a 50mm rear axle\u003c\/li\u003e\n\u003cli\u003eExprit chassis using a 50mm rear axle\u003c\/li\u003e\n\u003cli\u003eCS55 chassis using a 50mm rear axle\u003c\/li\u003e\n\u003cli\u003eGillard chassis using a 50mm rear axle\u003c\/li\u003e\n\u003cli\u003eRedspeed chassis using a 50mm rear axle\u003c\/li\u003e\n\u003cli\u003eEOS chassis using a 50mm rear axle\u003c\/li\u003e\n\u003cli\u003eAny compatible OTK-based chassis where part number 0047.FA and the 50mm specification are confirmed correct\u003c\/li\u003e\n\u003cli\u003eDirect-drive kart engine applications requiring the correct 50mm OTK sprocket carrier\u003c\/li\u003e\n\u003cli\u003eKart racers, mechanics, race teams and owner-drivers maintaining or setting up an OTK-based chassis\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eIf you are unsure whether this part is correct for your chassis, check your existing sprocket carrier part number or consult your chassis documentation before ordering.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":56939933958469,"sku":"0047.FA","price":100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/a_clean_high_key_studio_product_shot_on_a_seamles_6_batch_5.png?v=1783002927"},{"product_id":"otk-genuine-50mm-rear-axle","title":"OTK Genuine 50mm Rear Axle","description":"\u003cp\u003eAxle selection is one of the most consequential setup decisions in karting. The stiffness of the rear axle directly influences how the chassis transfers load through corners — a stiffer axle reduces rear flex and can help the kart maintain stability in high-grip conditions, while a softer axle allows more chassis movement and can assist rear-end rotation in lower-traction situations. The 0054G0 is the genuine OTK 50mm rear axle for OK, OKJ, and single-speed class chassis, available in two lengths and a full range of hardness grades to cover a wide variety of circuits and conditions.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 0054G0\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 50mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAvailable Lengths:\u003c\/strong\u003e 1000mm \/ 1030mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClass:\u003c\/strong\u003e OK \/ OKJ \/ Rotax \/ IAME X30 and other single-speed classes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSold individually\u003c\/strong\u003e — keys, bearings, and hubs not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eHardness Grades\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGrades run from softest to hardest. Availability varies by length.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eU\u003c\/strong\u003e — Super Soft\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQ\u003c\/strong\u003e — Soft\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eN\u003c\/strong\u003e — Medium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eA\u003c\/strong\u003e — Medium Hard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eH\u003c\/strong\u003e — Hard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHH\u003c\/strong\u003e — Extra Hard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHD\u003c\/strong\u003e — Extra Extra Hard\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTony Kart\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRacer 401 RR\u003c\/li\u003e\n  \u003cli\u003eRacer 401R\u003c\/li\u003e\n  \u003cli\u003eRacer 401S\u003c\/li\u003e\n  \u003cli\u003eRacer 401 T\u003c\/li\u003e\n  \u003cli\u003eRacer 401 TDX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKosmic\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMercury RR\u003c\/li\u003e\n  \u003cli\u003eMercury R\u003c\/li\u003e\n  \u003cli\u003eMercury T\u003c\/li\u003e\n  \u003cli\u003eMercury TDX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExprit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNoesis RR\u003c\/li\u003e\n  \u003cli\u003eNoesis T\u003c\/li\u003e\n  \u003cli\u003eNoesis TDX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLN Kart\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLN Four\u003c\/li\u003e\n  \u003cli\u003eLN Four T\u003c\/li\u003e\n  \u003cli\u003eLN Four TDX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRedspeed\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRX RR\u003c\/li\u003e\n  \u003cli\u003eRX T\u003c\/li\u003e\n  \u003cli\u003eRX TDX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOther OTK Group\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCS55 MY2025\u003c\/li\u003e\n  \u003cli\u003eEOS\u003c\/li\u003e\n  \u003cli\u003eGillard TG17\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWhen replacing an axle, also check the axle bearings and bearing carriers for wear, and inspect the brake disc carrier and sprocket hub for correct seating on the new axle. The 1030mm length is the standard fitment on the majority of current OTK Group chassis — confirm your chassis specification before ordering if you are unsure whether 1000mm or 1030mm is correct.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWorkshop Tip:\u003c\/strong\u003e Check axle straightness before fitting by rolling it on a flat surface or supporting it between centres. Even minor bends from an impact will cause vibration through the chassis and can accelerate bearing wear. An axle with visible deflection should be replaced rather than straightened.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"1000 \/ Super Soft (U)","offer_id":58432088736069,"sku":"0054G0100U","price":136.84,"currency_code":"GBP","in_stock":true},{"title":"1000 \/ Soft (Q)","offer_id":58432088768837,"sku":"0054G0100Q","price":136.84,"currency_code":"GBP","in_stock":true},{"title":"1000 \/ Medium (N)","offer_id":58432088801605,"sku":"0054G0100N","price":136.84,"currency_code":"GBP","in_stock":true},{"title":"1000 \/ Medium Hard (A)","offer_id":58432088834373,"sku":"0054G0100A","price":136.84,"currency_code":"GBP","in_stock":false},{"title":"1000 \/ Hard (H)","offer_id":58432088867141,"sku":"0054G0100H","price":136.84,"currency_code":"GBP","in_stock":true},{"title":"1000 \/ Extra Hard (HH)","offer_id":58432088899909,"sku":"0054G0100HH","price":136.84,"currency_code":"GBP","in_stock":true},{"title":"1000 \/ Extra Extra Hard (HD)","offer_id":58432088932677,"sku":"0054G0100HD","price":136.84,"currency_code":"GBP","in_stock":false},{"title":"1030 \/ Super Soft (U)","offer_id":58432088965445,"sku":"0054G0U","price":136.84,"currency_code":"GBP","in_stock":true},{"title":"1030 \/ Soft (Q)","offer_id":58432088998213,"sku":"0054G0Q","price":136.84,"currency_code":"GBP","in_stock":true},{"title":"1030 \/ Medium (N)","offer_id":58432089030981,"sku":"0054G0N","price":136.84,"currency_code":"GBP","in_stock":true},{"title":"1030 \/ Medium Hard (A)","offer_id":58432089063749,"sku":"0054G0A","price":136.84,"currency_code":"GBP","in_stock":true},{"title":"1030 \/ Hard (H)","offer_id":58432089096517,"sku":"0054G0H","price":136.84,"currency_code":"GBP","in_stock":true},{"title":"1030 \/ Extra Hard (HH)","offer_id":58432089129285,"sku":"0054G0HH","price":136.84,"currency_code":"GBP","in_stock":true},{"title":"1030 \/ Extra Extra Hard (HD)","offer_id":58432089162053,"sku":"0054G0HD","price":136.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-genuine-50mm-rear-axle-karting.webp?v=1782996569"},{"product_id":"otk-genuine-50mm-kz-rear-axle","title":"OTK Genuine 50mm KZ Rear Axle","description":"\u003cp\u003eThe gearbox classes place higher demands on the rear axle than direct-drive categories — the additional torque and different power delivery characteristics of a gearbox engine require a stiffer axle specification to maintain chassis balance and prevent excessive rear movement under acceleration. The 0054H0 is the genuine OTK 50mm KZ specification rear axle, available in a range of hardness grades and designed for OTK Group chassis running KZ, KZ2, or DD2 class engines.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 0054H0\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 50mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 1030mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClass:\u003c\/strong\u003e KZ \/ KZ2 \/ DD2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSold individually\u003c\/strong\u003e — keys, bearings, and hubs not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eHardness Grades\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGrades run from softest to hardest.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eU\u003c\/strong\u003e — Extra Soft\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQ\u003c\/strong\u003e — Soft\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eN\u003c\/strong\u003e — Medium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eH\u003c\/strong\u003e — Hard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHH\u003c\/strong\u003e — Extra Hard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHD\u003c\/strong\u003e — Extra Extra Hard\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTony Kart\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRacer 401 RR (KZ)\u003c\/li\u003e\n  \u003cli\u003eRacer 401 TDX (KZ)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKosmic\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMercury RR (KZ)\u003c\/li\u003e\n  \u003cli\u003eMercury TDX (KZ)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExprit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNoesis RR (KZ)\u003c\/li\u003e\n  \u003cli\u003eNoesis TDX (KZ)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLN Kart\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLN Four (KZ)\u003c\/li\u003e\n  \u003cli\u003eLN Four TDX (KZ)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRedspeed\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRX RR (KZ)\u003c\/li\u003e\n  \u003cli\u003eRX TDX (KZ)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOther OTK Group\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCS55 MY2025 (KZ)\u003c\/li\u003e\n  \u003cli\u003eEOS (KZ)\u003c\/li\u003e\n  \u003cli\u003eGillard TG17 (KZ)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe KZ axle (0054H0) uses a different specification to the OK axle (0054G0) and the two should not be interchanged between classes. When replacing, inspect the brake disc carrier, sprocket hub, and bearing carriers for wear and correct seating on the replacement axle. Axle keys should also be checked and replaced if worn.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWorkshop Tip:\u003c\/strong\u003e KZ axles are subjected to greater torsional loads than direct-drive axles. Check for straightness and any signs of stress marks near the keyways after impacts or particularly aggressive runs. A bent or cracked axle should be replaced immediately — never straightened and refitted.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Extra Soft (U)","offer_id":58435810656581,"sku":"0054H0U","price":136.84,"currency_code":"GBP","in_stock":false},{"title":"Soft (Q)","offer_id":58436034232645,"sku":"0054H0Q","price":136.84,"currency_code":"GBP","in_stock":true},{"title":"Medium (N)","offer_id":58436034265413,"sku":"0054H0N","price":136.84,"currency_code":"GBP","in_stock":false},{"title":"Hard (H)","offer_id":58436034298181,"sku":"0054H0H","price":136.84,"currency_code":"GBP","in_stock":true},{"title":"Extra Hard (HH)","offer_id":58436034330949,"sku":"0054H0HH","price":136.84,"currency_code":"GBP","in_stock":true},{"title":"Extra Extra Hard (HD)","offer_id":58436034363717,"sku":"0054H0HD","price":136.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-genuine-50mm-kz-rear-axle-1030mm_d432ee24-4cc2-4fa5-8977-2bacefed84b1.png?v=1782992456"},{"product_id":"otk-mxc-130-210mm-wheel-set","title":"OTK MXC 130\/212mm Magnesium Wheel Set","description":"\u003cp\u003eThe \u003cstrong\u003eOTK MXC Magnesium Wheel Set\u003c\/strong\u003e is a complete genuine OTK magnesium wheel package for OK and KZ class karting. It includes two 130mm front wheels and two rear wheels, supplied with valve stems and bead retaining screws. The MXC is OTK's forged magnesium wheel, designed for high-grip track conditions where consistent tyre temperature management and chassis feel are priorities. Tyres are not included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Reference:\u003c\/strong\u003e G.CER.MC130-212\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVendor:\u003c\/strong\u003e OTK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Forged magnesium alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront wheel width:\u003c\/strong\u003e 130mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRim width:\u003c\/strong\u003e 5 inch (standard metric pattern)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud pattern:\u003c\/strong\u003e OTK standard (M8 metric)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied with:\u003c\/strong\u003e Valve stems (0221.00) and bead retaining screws with O-rings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Complete set of 4 wheels (2 front, 2 rear)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTyres:\u003c\/strong\u003e Not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eChassis Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart:\u003c\/strong\u003e Racer 401 RR, Racer 401R, Racer 401S, Racer 401 T, Racer 401 TDX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic:\u003c\/strong\u003e Mercury RR, Mercury R, Mercury T, Mercury TDX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit:\u003c\/strong\u003e Noesis RR, Noesis T, Noesis TDX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLN Kart:\u003c\/strong\u003e LN Four, LN Four T, LN Four TDX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed:\u003c\/strong\u003e RX RR, RX T, RX TDX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCS55\u003c\/strong\u003e MY2025\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEOS\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGillard:\u003c\/strong\u003e TG17 MY2025, TDX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the OTK MXC Wheel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MXC is manufactured using a forged magnesium process, which produces a denser, more rigid wheel than cast alternatives. Its rigidity helps dissipate tyre heat more quickly, which supports consistent tyre pressures and grip levels over longer race runs. The MXC is particularly well suited to high-grip track conditions or warmer ambient temperatures, where keeping the tyre cool and maintaining setup stability are key. It is the wheel most commonly used in competitive OK and KZ racing where grip levels are high.\u003c\/p\u003e\n\u003cp\u003eWheel hub compatibility is specific to the OTK standard M8 stud pattern. Confirm hub and stud fitment on your chassis before ordering. Compatible with the \u003ca href=\"\/products\/otk-rear-hub-d50-77mm-magnesium\"\u003eOTK rear hub range\u003c\/a\u003e and paired with the \u003ca href=\"\/products\/wheel-nut-k-nut-front-rear-1\"\u003eOTK K Nut\u003c\/a\u003e and \u003ca href=\"\/products\/wheel-stud-long-1\"\u003ewheel studs\u003c\/a\u003e.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58439028965701,"sku":"GCERMC130-212","price":452.62,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-mxc-130-210mm-wheel-set-kart-wheels-detail-view_796115b0-2739-4969-8489-5a052f23e623.jpg?v=1783004424"},{"product_id":"otk-rear-hub-d50-77mm-magnesium","title":"OTK Rear Hub D50 x 77mm Magnesium","description":"\u003cp\u003eThe \u003cstrong\u003eOTK Rear Hub D50 x 77mm Magnesium\u003c\/strong\u003e (part 0046.E0) is the short magnesium rear wheel hub used across the OTK family of kart chassis. Cast from magnesium alloy, it mounts the rear wheel to the 50mm rear axle and is held in position by an M8 wheel stud and K nut. At 77mm, it is the shortest of the OTK rear hub range and is a genuine OTK spare part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0046.E0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVendor:\u003c\/strong\u003e OTK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Magnesium alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle bore:\u003c\/strong\u003e 50mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub length:\u003c\/strong\u003e 77mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e Individually\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eChassis Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart:\u003c\/strong\u003e Racer 401 RR, Racer 401R, Racer 401S, Racer 401 T, Racer 401 TDX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic:\u003c\/strong\u003e Mercury RR, Mercury R, Mercury T, Mercury TDX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit:\u003c\/strong\u003e Noesis RR, Noesis T, Noesis TDX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLN Kart:\u003c\/strong\u003e LN Four, LN Four T, LN Four TDX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed:\u003c\/strong\u003e RX RR, RX T, RX TDX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCS55\u003c\/strong\u003e MY2025\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEOS\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGillard:\u003c\/strong\u003e TG17 MY2025, TDX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSetup Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRear hub length is a primary chassis setup variable. A shorter hub such as the 77mm option reduces the contact patch spread at the rear axle, which can help free rear-end grip and improve rotation through slower corners. It is commonly selected on higher-grip track surfaces or when a driver wants more corner exit rotation. The 77mm hub is typically paired with the \u003ca href=\"\/products\/otk-genuine-50mm-rear-axle\"\u003eOTK 50mm Rear Axle\u003c\/a\u003e and used alongside hub length comparisons with the \u003ca href=\"\/products\/rear-hub-standard-mg-50x92mm\"\u003e92mm standard\u003c\/a\u003e, \u003ca href=\"\/products\/rear-hub-long-50x115mm\"\u003e115mm long\u003c\/a\u003e, and \u003ca href=\"\/products\/rear-hub-extra-long-50x148mm\"\u003e148mm extra long\u003c\/a\u003e options.\u003c\/p\u003e\n\u003cp\u003eWheel nuts, axle, axle key, and fixing hardware are sold separately.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58439622525253,"sku":"0046.E0","price":89.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-rear-hub-d50-77mm-magnesium-0046-e0.png?v=1783005928"},{"product_id":"otk-rear-brake-pads-current-bsd-bwd","title":"OTK Rear Brake Pads (Current) BSD \/ BWD","description":"\u003cp\u003eKeeping brake pads to the correct specification helps maintain consistent, predictable stopping performance on an OTK chassis. The 0082.G4KIT is the current replacement pad kit for all OTK Group chassis running either the BSD hydraulic system (2018–2024) or the revised BWD system introduced for 2025 — supplied as a complete set to the same specification as the original fitment. Compatible with Tony Kart, Kosmic, Exprit, LN Kart, Redspeed, and all other OTK Group chassis running BSD or BWD brakes.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 0082.G4KIT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrake System:\u003c\/strong\u003e BSD (2018–2024) and BWD (2025+)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e Full pad set\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTony Kart\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRacer 401 RR\u003c\/li\u003e\n  \u003cli\u003eRacer 401R\u003c\/li\u003e\n  \u003cli\u003eRacer 401S\u003c\/li\u003e\n  \u003cli\u003eRacer 401 T\u003c\/li\u003e\n  \u003cli\u003eRacer 401 TDX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKosmic\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMercury RR\u003c\/li\u003e\n  \u003cli\u003eMercury R\u003c\/li\u003e\n  \u003cli\u003eMercury T\u003c\/li\u003e\n  \u003cli\u003eMercury TDX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExprit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNoesis RR\u003c\/li\u003e\n  \u003cli\u003eNoesis T\u003c\/li\u003e\n  \u003cli\u003eNoesis TDX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLN Kart\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLN Four\u003c\/li\u003e\n  \u003cli\u003eLN Four T\u003c\/li\u003e\n  \u003cli\u003eLN Four TDX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRedspeed\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRX RR\u003c\/li\u003e\n  \u003cli\u003eRX T\u003c\/li\u003e\n  \u003cli\u003eRX TDX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOther (BWD 2025)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCS55 MY2025\u003c\/li\u003e\n  \u003cli\u003eEOS\u003c\/li\u003e\n  \u003cli\u003eGillard TG17 MY2025\u003c\/li\u003e\n  \u003cli\u003eGillard TG17 TDX\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eInspect pads at every meeting and replace before they reach minimum thickness — worn pads can score the disc surface and cause inconsistent pedal feel. When fitting new pads, it is also worth checking the \u003ca href=\"\/products\/rear-brake-disc-180mm-x-12-self-vented\"\u003e180mm disc\u003c\/a\u003e or \u003ca href=\"\/products\/rear-brake-disc-206x16mm-self-vented\"\u003e206mm disc\u003c\/a\u003e for heat cracking and the caliper seals for any sign of weeping fluid.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitting Note:\u003c\/strong\u003e Bed new pads in progressively over the first few laps rather than making a single heavy stop from speed. This helps seat the friction material evenly against the disc and can improve braking consistency throughout the session.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448114221381,"sku":"OTK-BD-0082-G4KIT","price":41.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-rear-brake-pads-current-bsd-bwd.jpg?v=1783087484"},{"product_id":"front-fairing-otk-m11-2025-pearl","title":"OTK Front Fairing M11 2025 Pearl","description":"\u003cp\u003eThe OTK M11 front fairing is the current-generation front bodywork for OTK Kart Group full-size chassis, introduced for the 2025 homologation cycle. Developed through CFD simulation, wind tunnel testing and on-track evaluation by the Tony Kart Racing Team, the M11 features internal turning vanes and a revised profile designed to reduce aerodynamic drag and improve efficiency compared to the previous generation. It is CIK-FIA homologated (012-BF-80, Group 2) for use in OK, KZ and DD2 competition at national and international level. This listing is for the Pearl white colourway, part number 0306.FFP.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0306.FFP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Pearl white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e M11 (2025 homologation)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHomologation:\u003c\/strong\u003e CIK-FIA 012-BF-80, Group 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClasses:\u003c\/strong\u003e OK, KZ, DD2\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGenuine OTK part\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eRacer 401 R (OK)\u003c\/li\u003e\n\u003cli\u003eRacer 401 S (KZ \/ DD2)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eMercury R OK\u003c\/li\u003e\n\u003cli\u003eMercury S KZ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eNoesis R OK\u003c\/li\u003e\n\u003cli\u003eNoesis S KZ \/ DD2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed\u003c\/strong\u003e\u003cul\u003e\u003cli\u003eChassis with M11 bodywork specification\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLN Kart\u003c\/strong\u003e\u003cul\u003e\u003cli\u003eChassis with M11 bodywork specification\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGillard\u003c\/strong\u003e\u003cul\u003e\u003cli\u003eChassis with M11 bodywork specification\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCS55\u003c\/strong\u003e\u003cul\u003e\u003cli\u003eChassis with M11 bodywork specification\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eBuying advice:\u003c\/strong\u003e The M11 fairing requires M11-specific spoiler supports and spoiler kit — it is not interchangeable with the hardware from the previous generation. The M10 side pods and rear protection are carried over unchanged and remain compatible. If you are replacing a damaged fairing mid-season, confirm your chassis year and bodywork specification against your technical regulations before ordering. The black colourway is listed separately — see \u003ca href=\"\/products\/front-fairing-otk-m11-2025-black\"\u003eOTK Front Fairing M11 2025 Black (0306.FFN)\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eRelated parts: \u003ca href=\"\/products\/front-spoiler-kit-m11-pearl-2025-with-number-board\"\u003eOTK Front Spoiler Kit M11 Pearl 2025 (0302.H0)\u003c\/a\u003e | \u003ca href=\"\/products\/front-spoiler-supports-m11-upper\"\u003eOTK Front Spoiler Supports M11 Upper (0304.G0)\u003c\/a\u003e | \u003ca href=\"\/products\/front-fairing-connection-kit-type-cik-m4-m5-m6\"\u003eOTK Front Fairing Connection Kit (0306.FCHKIT)\u003c\/a\u003e\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448117170501,"sku":"OTK-BW-0306-FFP","price":68.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-front-fairing-m11-2025-pearl.jpg?v=1783087728"},{"product_id":"front-fairing-otk-m11-2025-black","title":"OTK Front Fairing M11 2025 Black","description":"\u003cp\u003eThe OTK M11 front fairing is the current-generation front bodywork for OTK Kart Group full-size chassis, introduced for the 2025 homologation cycle. Developed through CFD simulation, wind tunnel testing and on-track evaluation by the Tony Kart Racing Team, the M11 features internal turning vanes and a revised profile designed to reduce aerodynamic drag and improve efficiency compared to the previous generation. It is CIK-FIA homologated (012-BF-80, Group 2) for use in OK, KZ and DD2 competition at national and international level. This listing is for the Black colourway, part number 0306.FFN.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0306.FFN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e M11 (2025 homologation)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHomologation:\u003c\/strong\u003e CIK-FIA 012-BF-80, Group 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClasses:\u003c\/strong\u003e OK, KZ, DD2\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGenuine OTK part\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eRacer 401 R (OK)\u003c\/li\u003e\n\u003cli\u003eRacer 401 S (KZ \/ DD2)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eMercury R OK\u003c\/li\u003e\n\u003cli\u003eMercury S KZ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eNoesis R OK\u003c\/li\u003e\n\u003cli\u003eNoesis S KZ \/ DD2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed\u003c\/strong\u003e\u003cul\u003e\u003cli\u003eChassis with M11 bodywork specification\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLN Kart\u003c\/strong\u003e\u003cul\u003e\u003cli\u003eChassis with M11 bodywork specification\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGillard\u003c\/strong\u003e\u003cul\u003e\u003cli\u003eChassis with M11 bodywork specification\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCS55\u003c\/strong\u003e\u003cul\u003e\u003cli\u003eChassis with M11 bodywork specification\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eBuying advice:\u003c\/strong\u003e The M11 fairing requires M11-specific spoiler supports and spoiler kit — it is not interchangeable with the hardware from the previous generation. The M10 side pods and rear protection are carried over unchanged and remain compatible. If you are replacing a damaged fairing mid-season, confirm your chassis year and bodywork specification against your technical regulations before ordering. The pearl white colourway is listed separately — see \u003ca href=\"\/products\/front-fairing-otk-m11-2025-pearl\"\u003eOTK Front Fairing M11 2025 Pearl (0306.FFP)\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eRelated parts: \u003ca href=\"\/products\/front-spoiler-kit-m11-black-2025-with-number-board\"\u003eOTK Front Spoiler Kit M11 Black 2025 (0302.H0NG)\u003c\/a\u003e | \u003ca href=\"\/products\/front-spoiler-supports-m11-upper\"\u003eOTK Front Spoiler Supports M11 Upper (0304.G0)\u003c\/a\u003e | \u003ca href=\"\/products\/front-fairing-connection-kit-type-cik-m4-m5-m6\"\u003eOTK Front Fairing Connection Kit (0306.FCHKIT)\u003c\/a\u003e\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448125034821,"sku":"OTK-BW-0306-FFN","price":68.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-front-fairing-m11-2025-black.jpg?v=1783087728"},{"product_id":"test-steering-column-std-470mm-490mm","title":"OTK Steering Column Standard 470mm \/ 490mm","description":"\u003cp\u003eThe \u003cstrong\u003eOTK Steering Column Standard\u003c\/strong\u003e (part number 0005.BA8) is a genuine OTK replacement steering column for Senior kart chassis across the full OTK Kart Group range. Available in two lengths — 470mm and 490mm — it replaces a worn, bent or damaged steering column and restores the steering system to factory specification. The standard column is the correct choice for the majority of Senior OK and KZ chassis setups; longer column options exist for specific ergonomic configurations but the 470mm and 490mm remain the most commonly fitted lengths across current OTK chassis generations.\u003c\/p\u003e\n\n\u003cp\u003eThe steering column is the primary mechanical link between the steering wheel and the front stub axles. Condition of the column directly affects steering precision and driver feedback. Any column that has been bent in an impact, shows corrosion at the bearing journals, or produces movement at the steering wheel should be replaced rather than run on.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0005.BA8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLengths available:\u003c\/strong\u003e 470mm and 490mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 20mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Standard Senior steering column replacement\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGenuine OTK spare part\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart:\u003c\/strong\u003e Racer 401 RR, 401R, 401S, 401 T, 401 TDX — Senior OK and KZ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic:\u003c\/strong\u003e Mercury RR, Mercury R, Mercury T, Mercury TDX — Senior OK and KZ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit:\u003c\/strong\u003e Noesis RR, Noesis T, Noesis TDX — Senior OK and KZ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed:\u003c\/strong\u003e RX RR, RX T, RX TDX — Senior OK and KZ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLN Kart:\u003c\/strong\u003e LN Four, LN Four T, LN Four TDX — Senior OK and KZ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGillard:\u003c\/strong\u003e TG17 MY2025, TG17 TDX — Senior OK and KZ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCS55:\u003c\/strong\u003e MY2025 — Senior OK and KZ\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eBuying Advice\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConfirm the column length fitted to your chassis before ordering — check your chassis documentation or measure the existing column from hub to hub. The 470mm and 490mm are both stocked; if you need a non-standard length such as 520mm or 540mm for a taller driver, check the available OTK extended column options. The steering column should always be replaced with the bearings and circlip checked at the same time — see the \u003ca href=\"\/products\/steering-column-bearing-10mm\"\u003eOTK Steering Column Bearing 10mm\u003c\/a\u003e and associated hardware.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/steering-column-bearing-10mm\"\u003eOTK Steering Column Bearing 10mm\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/steering-column-bearing-circlip\"\u003eOTK Steering Column Bearing Circlip\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448130277701,"sku":"OTK-STR-0005-BA8","price":47.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/0005.BA8.jpg?v=1783068578"},{"product_id":"rear-brake-disc-cooler","title":"OTK Rear Brake Disc Cooler","description":"\u003cp\u003eSustained heat build-up in a kart brake system can contribute to brake fade and accelerated pad wear, particularly at circuits with extended braking zones or during longer race formats. The 0309.00 disc cooler ducts airflow directly onto the rear brake disc as the kart moves, which can help manage operating temperatures and support more consistent braking over a session. It is designed to integrate with the OTK rear brake assembly on both BSD and BWD equipped chassis.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 0309.00\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Brake disc cooling duct\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrake System:\u003c\/strong\u003e BSD and BWD\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTony Kart\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRacer 401 RR\u003c\/li\u003e\n  \u003cli\u003eRacer 401R\u003c\/li\u003e\n  \u003cli\u003eRacer 401S\u003c\/li\u003e\n  \u003cli\u003eRacer 401 T\u003c\/li\u003e\n  \u003cli\u003eRacer 401 TDX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKosmic\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMercury RR\u003c\/li\u003e\n  \u003cli\u003eMercury R\u003c\/li\u003e\n  \u003cli\u003eMercury T\u003c\/li\u003e\n  \u003cli\u003eMercury TDX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExprit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNoesis RR\u003c\/li\u003e\n  \u003cli\u003eNoesis T\u003c\/li\u003e\n  \u003cli\u003eNoesis TDX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLN Kart\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLN Four\u003c\/li\u003e\n  \u003cli\u003eLN Four T\u003c\/li\u003e\n  \u003cli\u003eLN Four TDX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRedspeed\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRX RR\u003c\/li\u003e\n  \u003cli\u003eRX T\u003c\/li\u003e\n  \u003cli\u003eRX TDX\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe cooler is supplied on its own — all mounting hardware and ducting is included in the \u003ca href=\"\/products\/rear-brake-disc-cooler-fitting-kit-for\"\u003e0309.00KIT fitting kit\u003c\/a\u003e, which is required for installation and should be ordered at the same time.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWorkshop Tip:\u003c\/strong\u003e When positioning the duct outlet, aim airflow across the vented section of the disc rather than directly at the caliper or pads. Directing cold air onto hot friction material can cause uneven thermal stress in the pad compound.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448142139717,"sku":"OTK-BD-0309-00","price":21.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-rear-brake-disc-cooler.jpg?v=1783087527"},{"product_id":"front-fairing-connection-kit-type-cik-m4-m5-m6","title":"OTK Front Fairing Connection Kit -Type CIK -M4, M5, M6","description":"\u003cp\u003eThe OTK Front Fairing Connection Kit (part 0306.FCHKIT) is the genuine OTK hardware kit designed to secure the CIK-homologated front fairing to the nose cone support bracket. Manufactured to the same standard as the fairing itself, this kit helps ensure a secure, rattle-free fit that holds position throughout a race session. Supplied as a complete set of fixings and is compatible with M4, M5, and M6 chassis generations.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0306.FCHKIT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Complete fairing connection fixing kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCIK Approved:\u003c\/strong\u003e Yes — manufactured to CIK-FIA homologation standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eRacer EVK (M4, M5, M6 chassis generations)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eMercury R (M4, M5, M6 chassis generations)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eNoesis R (M4, M5, M6 chassis generations)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eModels using M4, M5, M6 bodywork\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eBuying Advice\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf your fairing is loose or you have lost fixings during a crash, replace the full kit rather than individual bolts to ensure correct torque and alignment. Compatible with \u003ca href=\"\/products\/otk-front-fairing-kg-507\"\u003eOTK Front Fairing KG 507\u003c\/a\u003e and the M11 fairing range.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448143548741,"sku":"OTK-BW-0306-FCHKIT","price":15.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-front-fairing-connection-kit-type-cik-m4-m5-m6.jpg?v=1783087728"},{"product_id":"nassau-panel-yellow-plate-m9-m11","title":"OTK Nassau Panel Yellow Number Plate M9 \u0026 M11","description":"\u003cp\u003eThe \u003cstrong\u003eOTK Nassau Panel Yellow Number Plate M9 \u0026amp; M11\u003c\/strong\u003e (part number 0302.H02) is a genuine OTK replacement yellow number board plate compatible with both M9 and M11 Nassau panels. The yellow plate provides the required number board area for display of the driver's kart number as required by CIK-FIA sporting regulations. This part is sold individually and is suitable as a replacement when the original plate is damaged or as an additional board for karts that have purchased a Nassau panel kit without a number board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0302.H02\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e M9 and M11 Nassau panels\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGenuine OTK spare part\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/front-spoiler-kit-m11-pearl-2025-with-number-board\"\u003eOTK Nassau Panel Kit M11 2025 (with board)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/front-spoiler-kit-m11-pearl-2025-without-number-board\"\u003eOTK Nassau Panel Kit M11 Pearl 2025 Without Number Board (0302.H01)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448179200325,"sku":"OTK-BW-0302-H02","price":57.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-front-spoiler-yellow-plate-m9-m11.jpg?v=1783087797"},{"product_id":"tonykart-high-grip-steering-1","title":"OTK Tonykart High Grip Steering","description":"\u003cp\u003eThe Tony Kart HGS (High Grip Steering) is the factory-fit steering wheel for Senior Tony Kart chassis in OK, KZ and Tag categories. Developed in collaboration with the Tony Kart Racing Team, the HGS features a high-grip rubber compound covering the four-spoke, oval-grip frame — designed to improve driver feel and reduce fatigue during long stints. The angled hub positioning supports an ergonomic driving posture for a wide range of driver sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Specifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 0083.E0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter diameter:\u003c\/strong\u003e 330mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle diameter:\u003c\/strong\u003e 35mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpokes:\u003c\/strong\u003e 4-spoke design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrip:\u003c\/strong\u003e High-grip rubber coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBranding:\u003c\/strong\u003e Tony Kart\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub fitment:\u003c\/strong\u003e OTK 20mm steering column\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eTony Kart:\u003c\/strong\u003e\u003cul\u003e\u003cli\u003eRacer 401 RR, 401R, 401S, 401T, 401 TDX — all Senior variants\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThis is the Tony Kart branded version of the OTK HGS steering wheel. Kosmic, Exprit, Redspeed, LN Kart, Gillard and CS55 branded equivalents are available separately.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Products\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFor Mini Kart drivers, the \u003ca href=\"\/products\/tonykart-mini-steering-wheel-d-33mm-1\"\u003eTony Kart Mini Steering Wheel D.33mm\u003c\/a\u003e is the Cadet equivalent. For Rookie 900, see the \u003ca href=\"\/products\/steering-wheel-rookie-900-tonykart-1\"\u003eOTK Steering Wheel Rookie 900\u003c\/a\u003e.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448195191109,"sku":"OTK-SW-0083-E0","price":192.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-tonykart-high-grip-steering-wheel.jpg?v=1783087240"},{"product_id":"tonykart-mini-steering-wheel-d-33mm-1","title":"OTK Tonykart Mini Steering Wheel D.33mm","description":"\u003cp\u003eThe Tony Kart Mini Steering Wheel D.33mm is the factory-fit steering wheel for Mini 950 and Cadet Tony Kart chassis. Featuring a 330mm outer diameter with a 32mm round grip section and a four-spoke design, the Mini wheel uses the same high-adhesion rubber coating as the Senior HGS range — scaled to suit the smaller hand size of younger drivers. The larger-diameter crown design compared to earlier models is intended to help with precise steering inputs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Specifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 0083.MAT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter diameter:\u003c\/strong\u003e 330mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle diameter:\u003c\/strong\u003e 32mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpokes:\u003c\/strong\u003e 4-spoke design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrip:\u003c\/strong\u003e High-grip rubber coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBranding:\u003c\/strong\u003e Tony Kart\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub fitment:\u003c\/strong\u003e OTK 20mm steering column\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eTony Kart:\u003c\/strong\u003e\u003cul\u003e\u003cli\u003eRacer 401 — Mini 950 and Cadet variants\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThis is the Tony Kart branded version. Kosmic, Exprit, Redspeed, LN Kart and Gillard branded equivalents are available separately. For Micro Kart \/ Rookie 900, see the \u003ca href=\"\/products\/steering-wheel-rookie-900-tonykart-1\"\u003eOTK Steering Wheel Rookie 900\u003c\/a\u003e.\u003c\/em\u003e\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448201941317,"sku":"OTK-SW-0083-MAT","price":179.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-tonykart-mini-steering-wheel-d33mm.jpg?v=1783087277"},{"product_id":"hst-hub-bearing-spacer-front-hub","title":"OTK HST Hub Bearing Spacer Front Hub","description":"\u003cp\u003eThe \u003cstrong\u003eOTK HST Hub Bearing Spacer\u003c\/strong\u003e (part 0023.CB) is the bearing spacer used within the OTK HST front hub assembly on 25mm stub axle systems. It sits between the hub bearing and the hub body, providing precise axial positioning of the bearing within the hub. A genuine OTK replacement part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0023.CB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVendor:\u003c\/strong\u003e OTK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal diameter:\u003c\/strong\u003e 25mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 30mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e HST front hub bearing spacer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e Individually\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eChassis Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all OTK-based chassis fitted with the HST 25mm front hub system:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart:\u003c\/strong\u003e Racer 401 series (all variants)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic:\u003c\/strong\u003e Mercury series (all variants)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit:\u003c\/strong\u003e Noesis series (all variants)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLN Kart:\u003c\/strong\u003e LN Four series (all variants)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed:\u003c\/strong\u003e RX series (all variants)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCS55, EOS, Gillard TG17\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis spacer is included in the complete front hub kits: \u003ca href=\"\/products\/hst-mg-front-hub-complete-l-80mm-25mm\"\u003e80mm kit\u003c\/a\u003e, \u003ca href=\"\/products\/hst-mg-front-hub-complete-l-95mm-25mm\"\u003e95mm kit\u003c\/a\u003e, and \u003ca href=\"\/products\/hst-mg-front-hub-complete-l-110mm-25mm\"\u003e110mm kit\u003c\/a\u003e. Order individually when replacing a worn or damaged spacer only.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448203809093,"sku":"OTK-HUB-0023-CB","price":3.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-hst-hub-bearing-spacer-front-hub.jpg?v=1783087691"},{"product_id":"hst-mg-front-hub-complete-l-110mm-25mm","title":"OTK HST MG Front Hub Complete - l.110mm (25mm)","description":"\u003cp\u003eThe \u003cstrong\u003eOTK HST MG Front Hub Complete - 110mm (25mm)\u003c\/strong\u003e (part 0103.C0DKIT) is the long-length magnesium front wheel hub kit for KZ-class OTK kart chassis running the HST front hub system. Designed for chassis fitted with a front brake, where a 25mm stub axle bearing bore is used. Supplied as a complete kit including the hub body, bearing, spacer, and locating ring. A genuine OTK spare part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0103.C0DKIT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVendor:\u003c\/strong\u003e OTK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Magnesium alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStub axle bearing bore:\u003c\/strong\u003e 25mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub length:\u003c\/strong\u003e 110mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub system:\u003c\/strong\u003e HST (front brake compatible)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e Complete kit (hub, bearing, spacer, locating ring)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eChassis Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart:\u003c\/strong\u003e Racer 401 RR, Racer 401R, Racer 401S, Racer 401 T, Racer 401 TDX (KZ)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic:\u003c\/strong\u003e Mercury RR, Mercury R, Mercury T, Mercury TDX (KZ)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit:\u003c\/strong\u003e Noesis RR, Noesis T, Noesis TDX (KZ)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLN Kart:\u003c\/strong\u003e LN Four, LN Four T, LN Four TDX (KZ)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed:\u003c\/strong\u003e RX RR, RX T, RX TDX (KZ)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCS55\u003c\/strong\u003e MY2025\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEOS\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGillard:\u003c\/strong\u003e TG17 MY2025, TDX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBuying Advice\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 110mm hub is the longer of the two KZ\/OK-with-front-brake HST options. Three 25mm HST lengths are available: \u003ca href=\"\/products\/hst-mg-front-hub-complete-l-80mm-25mm\"\u003e80mm (short)\u003c\/a\u003e, \u003ca href=\"\/products\/hst-mg-front-hub-complete-l-95mm-25mm\"\u003e95mm (OK)\u003c\/a\u003e, and \u003ca href=\"\/products\/hst-mg-front-hub-complete-l-110mm-25mm\"\u003e110mm (KZ long)\u003c\/a\u003e. Individual replacement parts including the \u003ca href=\"\/products\/hst-hub-bearing-25-42x12mm\"\u003e25\/42x12mm hub bearing\u003c\/a\u003e and \u003ca href=\"\/products\/hst-hub-bearing-spacer-front-hub\"\u003ebearing spacer\u003c\/a\u003e are sold separately.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448203841861,"sku":"OTK-HUB-0103-C0DKIT","price":100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-hst-mg-front-hub-complete-l-110mm-25mm.jpg?v=1783087691"},{"product_id":"hst-mg-front-hub-complete-l-80mm-25mm","title":"OTK HST MG Front Hub Complete - l.80mm (25mm)","description":"\u003cp\u003eThe \u003cstrong\u003eOTK HST MG Front Hub Complete - 80mm (25mm)\u003c\/strong\u003e (part 0103.C0CKIT) is the short magnesium front wheel hub kit for OTK kart chassis fitted with the HST front hub system. It is designed for KZ and OK chassis running a front brake, where a 25mm stub axle bearing bore is used. Supplied as a complete kit including the hub body, bearing, spacer, and locating ring. A genuine OTK spare part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0103.C0CKIT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVendor:\u003c\/strong\u003e OTK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Magnesium alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStub axle bearing bore:\u003c\/strong\u003e 25mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub length:\u003c\/strong\u003e 80mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub system:\u003c\/strong\u003e HST (front brake compatible)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e Complete kit (hub, bearing, spacer, locating ring)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eChassis Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart:\u003c\/strong\u003e Racer 401 RR, Racer 401R, Racer 401S, Racer 401 T, Racer 401 TDX (KZ \/ OK with front brake)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic:\u003c\/strong\u003e Mercury RR, Mercury R, Mercury T, Mercury TDX (KZ \/ OK with front brake)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit:\u003c\/strong\u003e Noesis RR, Noesis T, Noesis TDX (KZ \/ OK with front brake)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLN Kart:\u003c\/strong\u003e LN Four, LN Four T, LN Four TDX (KZ \/ OK with front brake)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed:\u003c\/strong\u003e RX RR, RX T, RX TDX (KZ \/ OK with front brake)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCS55\u003c\/strong\u003e MY2025\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEOS\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGillard:\u003c\/strong\u003e TG17 MY2025, TDX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBuying Advice\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOTK front hubs are available in three HST lengths for 25mm bearing systems: \u003ca href=\"\/products\/hst-mg-front-hub-complete-l-80mm-25mm\"\u003e80mm (short)\u003c\/a\u003e, \u003ca href=\"\/products\/hst-mg-front-hub-complete-l-95mm-25mm\"\u003e95mm (standard OK)\u003c\/a\u003e, and \u003ca href=\"\/products\/hst-mg-front-hub-complete-l-110mm-25mm\"\u003e110mm (long, KZ)\u003c\/a\u003e. Front hub length affects how the front wheel is positioned laterally on the stub axle and influences front-end grip and steering feel. Verify the correct length against your chassis setup documentation before ordering. Sold as a pair (left and right) or individually — check quantity before purchasing.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448203874629,"sku":"OTK-HUB-0103-C0CKIT","price":91.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-hst-mg-front-hub-complete-l-80mm-25mm.jpg?v=1783087656"},{"product_id":"hst-mg-front-hub-complete-l-95mm-25mm","title":"OTK HST MG Front Hub Complete - l.95mm (25mm)","description":"\u003cp\u003eThe \u003cstrong\u003eOTK HST MG Front Hub Complete - 95mm (25mm)\u003c\/strong\u003e (part 0103.C0EKIT) is the standard-length magnesium front wheel hub kit for OK-class OTK kart chassis running the HST front hub system. Fitted with a 25mm stub axle bearing bore, this is the most commonly selected front hub length for OK specification. Supplied as a complete kit including the hub body, bearing, spacer, and locating ring. A genuine OTK spare part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0103.C0EKIT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVendor:\u003c\/strong\u003e OTK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Magnesium alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStub axle bearing bore:\u003c\/strong\u003e 25mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub length:\u003c\/strong\u003e 95mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub system:\u003c\/strong\u003e HST (front brake compatible)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e Complete kit (hub, bearing, spacer, locating ring)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eChassis Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart:\u003c\/strong\u003e Racer 401 RR, Racer 401R, Racer 401S, Racer 401 T, Racer 401 TDX (OK)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic:\u003c\/strong\u003e Mercury RR, Mercury R, Mercury T, Mercury TDX (OK)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit:\u003c\/strong\u003e Noesis RR, Noesis T, Noesis TDX (OK)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLN Kart:\u003c\/strong\u003e LN Four, LN Four T, LN Four TDX (OK)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed:\u003c\/strong\u003e RX RR, RX T, RX TDX (OK)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCS55\u003c\/strong\u003e MY2025\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEOS\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGillard:\u003c\/strong\u003e TG17 MY2025, TDX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBuying Advice\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 95mm front hub is the standard OTK OK-class selection. Three HST 25mm lengths are available: \u003ca href=\"\/products\/hst-mg-front-hub-complete-l-80mm-25mm\"\u003e80mm (short, KZ)\u003c\/a\u003e, \u003ca href=\"\/products\/hst-mg-front-hub-complete-l-95mm-25mm\"\u003e95mm (standard OK)\u003c\/a\u003e, and \u003ca href=\"\/products\/hst-mg-front-hub-complete-l-110mm-25mm\"\u003e110mm (long, KZ)\u003c\/a\u003e. Front hub length affects front-end lateral positioning, grip balance, and steering feel. Refer to your chassis documentation to confirm the correct length for your class and setup. Individual replacement parts including the \u003ca href=\"\/products\/hst-hub-bearing-25-42x12mm\"\u003e25\/42x12mm hub bearing\u003c\/a\u003e and \u003ca href=\"\/products\/hst-hub-bearing-spacer-front-hub\"\u003ebearing spacer\u003c\/a\u003e are available separately.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448203907397,"sku":"OTK-HUB-0103-C0EKIT","price":98.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-hst-mg-front-hub-complete-l-95mm-25mm.jpg?v=1783087691"},{"product_id":"hst-hub-bearing-25-42x12mm","title":"OTK HST Hub Bearing 25 \/ 42x12mm","description":"\u003cp\u003eThe \u003cstrong\u003eOTK HST Hub Bearing 25\/42x12mm\u003c\/strong\u003e (part 0024.BA) is the front wheel hub bearing used in OTK HST front hub assemblies on 25mm stub axle systems. With an inner diameter of 25mm, outer diameter of 42mm, and a width of 12mm, it supports the front wheel hub on the stub axle. A genuine OTK replacement part, sold individually.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0024.BA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVendor:\u003c\/strong\u003e OTK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner diameter:\u003c\/strong\u003e 25mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter diameter:\u003c\/strong\u003e 42mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 12mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e HST front hub bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e Individually\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eChassis Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all OTK-based chassis fitted with the HST 25mm front hub system (Tony Kart, Kosmic, Exprit, LN Kart, Redspeed, CS55, EOS, Gillard).\u003c\/p\u003e\n\u003cp\u003eThis bearing is included within the complete front hub kits: \u003ca href=\"\/products\/hst-mg-front-hub-complete-l-80mm-25mm\"\u003e80mm kit\u003c\/a\u003e, \u003ca href=\"\/products\/hst-mg-front-hub-complete-l-95mm-25mm\"\u003e95mm kit\u003c\/a\u003e, and \u003ca href=\"\/products\/hst-mg-front-hub-complete-l-110mm-25mm\"\u003e110mm kit\u003c\/a\u003e. Order individually when replacing a worn bearing on an existing hub.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448203940165,"sku":"OTK-HUB-0024-BA","price":7.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-hst-hub-bearing-25-42x12mm.jpg?v=1783087691"},{"product_id":"hst-hub-locating-ring-for-wheel-hub","title":"OTK HST Hub Locating Ring For Wheel Hub","description":"\u003cp\u003eThe \u003cstrong\u003eOTK HST Hub Locating Ring\u003c\/strong\u003e (part 0125.00) is the plastic locating ring that fits between the front wheel and the hub on OTK kart chassis. It ensures correct lateral positioning of the wheel on the hub and prevents movement during running. A genuine OTK replacement part, sold individually.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0125.00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVendor:\u003c\/strong\u003e OTK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal diameter:\u003c\/strong\u003e 25mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Front wheel hub locating ring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e Individually\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eChassis Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all OTK-based chassis fitted with the HST 25mm front hub system (Tony Kart, Kosmic, Exprit, LN Kart, Redspeed, CS55, EOS, Gillard).\u003c\/p\u003e\n\u003cp\u003eIncluded within the complete front hub kits: \u003ca href=\"\/products\/hst-mg-front-hub-complete-l-80mm-25mm\"\u003e80mm kit\u003c\/a\u003e, \u003ca href=\"\/products\/hst-mg-front-hub-complete-l-95mm-25mm\"\u003e95mm kit\u003c\/a\u003e, and \u003ca href=\"\/products\/hst-mg-front-hub-complete-l-110mm-25mm\"\u003e110mm kit\u003c\/a\u003e. Replace individually when the locating ring is damaged or lost.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448204038469,"sku":"OTK-HUB-0125-00","price":3.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-hst-hub-locating-ring-for-wheel-hub.jpg?v=1783087691"},{"product_id":"rear-hub-long-50x115mm","title":"OTK Rear Hub Long 50x115mm","description":"\u003cp\u003eThe \u003cstrong\u003eOTK Rear Hub Long 50x115mm\u003c\/strong\u003e (part 0053.EA) is the long-length magnesium rear wheel hub in the OTK rear hub range. It mounts the rear wheel to the 50mm rear axle across OTK-based kart chassis and is a genuine OTK spare part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0053.EA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVendor:\u003c\/strong\u003e OTK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Magnesium alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle bore:\u003c\/strong\u003e 50mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub length:\u003c\/strong\u003e 115mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e Individually\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eChassis Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart:\u003c\/strong\u003e Racer 401 RR, Racer 401R, Racer 401S, Racer 401 T, Racer 401 TDX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic:\u003c\/strong\u003e Mercury RR, Mercury R, Mercury T, Mercury TDX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit:\u003c\/strong\u003e Noesis RR, Noesis T, Noesis TDX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLN Kart:\u003c\/strong\u003e LN Four, LN Four T, LN Four TDX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed:\u003c\/strong\u003e RX RR, RX T, RX TDX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCS55\u003c\/strong\u003e MY2025\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEOS\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGillard:\u003c\/strong\u003e TG17 MY2025, TDX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSetup Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA longer rear hub increases the axle's effective gripping surface at the rear wheel, which tends to add rear-end stability and grip. The 115mm long hub is often selected on lower-grip or wet-condition tracks, or where additional rear stability is needed under acceleration. It is part of a four-length rear hub range — compare with the \u003ca href=\"\/products\/otk-rear-hub-d50-77mm-magnesium\"\u003e77mm short hub\u003c\/a\u003e, \u003ca href=\"\/products\/rear-hub-standard-mg-50x92mm\"\u003e92mm standard hub\u003c\/a\u003e, and \u003ca href=\"\/products\/rear-hub-extra-long-50x148mm\"\u003e148mm extra long hub\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with the \u003ca href=\"\/products\/otk-genuine-50mm-rear-axle\"\u003eOTK 50mm Rear Axle\u003c\/a\u003e. Wheel nuts, axle, axle key, and fixing hardware are sold separately.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448204071237,"sku":"OTK-HUB-0053-EA","price":125.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-rear-hub-long-50x115mm.jpg?v=1783087691"},{"product_id":"rear-hub-short-mg-50x77mm","title":"OTK Rear Hub Short MG 50x77mm","description":"\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This product may be a duplicate of \u003ca href=\"\/products\/otk-rear-hub-d50-77mm-magnesium\"\u003eOTK Rear Hub D50 x 77mm Magnesium\u003c\/a\u003e (part 0046.E0). Please refer to the active listing. This draft product requires owner review before activation.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448204104005,"sku":"OTK-HUB-0046-E0","price":89.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-rear-hub-short-mg-50x77mm.jpg?v=1783087691"},{"product_id":"rear-hub-extra-long-50x148mm","title":"OTK Rear Hub Extra Long 50x148mm","description":"\u003cp\u003eThe \u003cstrong\u003eOTK Rear Hub Extra Long 50x148mm\u003c\/strong\u003e (part 0053.F0) is the longest rear wheel hub in the OTK rear hub range. It mounts the rear wheel to the 50mm rear axle on OTK-based kart chassis and is a genuine OTK spare part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0053.F0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVendor:\u003c\/strong\u003e OTK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Magnesium alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle bore:\u003c\/strong\u003e 50mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub length:\u003c\/strong\u003e 148mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e Individually\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eChassis Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart:\u003c\/strong\u003e Racer 401 RR, Racer 401R, Racer 401S, Racer 401 T, Racer 401 TDX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic:\u003c\/strong\u003e Mercury RR, Mercury R, Mercury T, Mercury TDX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit:\u003c\/strong\u003e Noesis RR, Noesis T, Noesis TDX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLN Kart:\u003c\/strong\u003e LN Four, LN Four T, LN Four TDX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed:\u003c\/strong\u003e RX RR, RX T, RX TDX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCS55\u003c\/strong\u003e MY2025\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEOS\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGillard:\u003c\/strong\u003e TG17 MY2025, TDX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSetup Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 148mm extra long hub provides the most axle-to-wheel grip of any hub in the OTK range, maximising rear stability. It is typically used when maximum rear grip is required — low-grip tracks, wet conditions, or circuits where rear traction is the primary challenge. It forms the top of the OTK rear hub range alongside the \u003ca href=\"\/products\/otk-rear-hub-d50-77mm-magnesium\"\u003e77mm short hub\u003c\/a\u003e, \u003ca href=\"\/products\/rear-hub-standard-mg-50x92mm\"\u003e92mm standard hub\u003c\/a\u003e, and \u003ca href=\"\/products\/rear-hub-long-50x115mm\"\u003e115mm long hub\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with the \u003ca href=\"\/products\/otk-genuine-50mm-rear-axle\"\u003eOTK 50mm Rear Axle\u003c\/a\u003e. Wheel nuts, axle, axle key, and fixing hardware are sold separately.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448204136773,"sku":"OTK-HUB-0053-F0","price":134.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-rear-hub-extra-long-50x148mm.jpg?v=1783087691"},{"product_id":"rear-hub-standard-mg-50x92mm","title":"OTK Rear Hub Standard MG 50x92mm","description":"\u003cp\u003eThe \u003cstrong\u003eOTK Rear Hub Standard MG 50x92mm\u003c\/strong\u003e (part 0053.E0) is the standard-length magnesium rear wheel hub in the OTK rear hub range. It mounts the rear wheel to the 50mm rear axle across OTK-based kart chassis and is a genuine OTK spare part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0053.E0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVendor:\u003c\/strong\u003e OTK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Magnesium alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle bore:\u003c\/strong\u003e 50mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub length:\u003c\/strong\u003e 92mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e Individually\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eChassis Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart:\u003c\/strong\u003e Racer 401 RR, Racer 401R, Racer 401S, Racer 401 T, Racer 401 TDX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic:\u003c\/strong\u003e Mercury RR, Mercury R, Mercury T, Mercury TDX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit:\u003c\/strong\u003e Noesis RR, Noesis T, Noesis TDX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLN Kart:\u003c\/strong\u003e LN Four, LN Four T, LN Four TDX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed:\u003c\/strong\u003e RX RR, RX T, RX TDX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCS55\u003c\/strong\u003e MY2025\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEOS\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGillard:\u003c\/strong\u003e TG17 MY2025, TDX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSetup Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 92mm hub is the standard starting point for most OTK chassis setup. It sits in the middle of the rear hub range, offering a balanced rear-end response across a broad range of track conditions and engine classes. A longer hub increases axle rigidity at the rear wheel, which can add rear grip and stability under braking and acceleration. Compare with the \u003ca href=\"\/products\/otk-rear-hub-d50-77mm-magnesium\"\u003e77mm short hub\u003c\/a\u003e, \u003ca href=\"\/products\/rear-hub-long-50x115mm\"\u003e115mm long hub\u003c\/a\u003e, and \u003ca href=\"\/products\/rear-hub-extra-long-50x148mm\"\u003e148mm extra long hub\u003c\/a\u003e when setting up your chassis.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with the \u003ca href=\"\/products\/otk-genuine-50mm-rear-axle\"\u003eOTK 50mm Rear Axle\u003c\/a\u003e. Wheel nuts, axle, axle key, and fixing hardware are sold separately.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448204169541,"sku":"OTK-HUB-0053-E0","price":93.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-rear-hub-standard-mg-50x92mm.jpg?v=1783087691"},{"product_id":"washer-m8-for-track-rod-hub-8x12-x-2mm-1","title":"OTK Washer M8 For Track Rod \u0026 Hub - 8x12 X 2mm","description":"\u003cp\u003eThe \u003cstrong\u003eOTK Washer M8 For Track Rod \u0026amp; Hub\u003c\/strong\u003e (part 1.R.P.8X12) is a genuine OTK M8 flat washer used in track rod and hub assemblies on OTK kart chassis. Dimensions: 8mm inner diameter, 12mm outer diameter, 2mm thickness. Sold individually.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 1.R.P.8X12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVendor:\u003c\/strong\u003e OTK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner diameter:\u003c\/strong\u003e 8mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter diameter:\u003c\/strong\u003e 12mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 2mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Track rod end and hub assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e Individually\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eChassis Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all OTK-based chassis track rod and hub assemblies (Tony Kart, Kosmic, Exprit, LN Kart, Redspeed, CS55, EOS, Gillard). Commonly used alongside track rod rose joints and hub fixing hardware.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448204202309,"sku":"OTK-HUB-1-R-P-8X12","price":0.03,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-washer-m8-for-track-rod-hub-8x12-x-2mm.jpg?v=1783087691"},{"product_id":"wheel-nut-k-nut-front-rear-1","title":"OTK Wheel Nut (K Nut) Front \u0026 Rear","description":"\u003cp\u003eThe \u003cstrong\u003eOTK Wheel Nut (K Nut)\u003c\/strong\u003e (part 0044.B0) is the self-locking M8 wheel nut used to secure front and rear wheels to OTK kart chassis hubs. Known in karting as the K nut, it incorporates a self-locking mechanism to resist loosening under vibration during racing. A genuine OTK spare part, sold individually.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0044.B0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVendor:\u003c\/strong\u003e OTK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e M8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Self-locking K nut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Front and rear wheel retention\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e Individually\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eChassis Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all OTK-based chassis front and rear hubs (Tony Kart, Kosmic, Exprit, LN Kart, Redspeed, CS55, EOS, Gillard).\u003c\/p\u003e\n\u003cp\u003eUsed in conjunction with the \u003ca href=\"\/products\/wheel-stud-long-1\"\u003eOTK wheel stud (long)\u003c\/a\u003e on standard front and rear hubs, or the \u003ca href=\"\/products\/wheel-stud-short-mini-950-rear-hub-1\"\u003eshort wheel stud\u003c\/a\u003e on Mini 950 rear hubs. It is good practice to replace wheel nuts periodically as the self-locking nylon insert can wear with repeated use.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448204235077,"sku":"OTK-HUB-0044-B0","price":0.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-wheel-nut-k-nut-front-rear-b.jpg?v=1783087764"},{"product_id":"wheel-stud-long-1","title":"OTK Wheel Stud Long","description":"\u003cp\u003eThe \u003cstrong\u003eOTK Wheel Stud Long\u003c\/strong\u003e (part 0045.00) is the standard M8 wheel stud used on OTK front and rear wheel hubs. It threads into the hub and provides the fixing point for the K nut that secures the wheel. A genuine OTK spare part, sold individually.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0045.00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVendor:\u003c\/strong\u003e OTK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e M8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Standard front and rear hub wheel retention\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e Individually\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eChassis Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all OTK-based chassis standard front and rear hubs (Tony Kart, Kosmic, Exprit, LN Kart, Redspeed, CS55, EOS, Gillard). Not for use on Mini 950 rear hubs — see \u003ca href=\"\/products\/wheel-stud-short-mini-950-rear-hub-1\"\u003eOTK Wheel Stud Short (Mini 950)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eUsed with the \u003ca href=\"\/products\/wheel-nut-k-nut-front-rear-1\"\u003eOTK K Nut\u003c\/a\u003e. Replace if threads are damaged or if the stud is bent. Carry spares when racing as wheel stud damage can occur in contact incidents.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448204333381,"sku":"OTK-HUB-0045-00","price":0.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-wheel-stud-long-b.jpg?v=1783087764"},{"product_id":"wheel-stud-short-mini-950-rear-hub-1","title":"OTK Wheel Stud Short Mini 950 Rear Hub","description":"\u003cp\u003eThe \u003cstrong\u003eOTK Wheel Stud Short (Mini 950 Rear Hub)\u003c\/strong\u003e (part 0045.A0) is the shorter M8 wheel stud used specifically on the OTK Mini 950 rear hub. It is shorter than the standard wheel stud to accommodate the reduced hub depth of the Mini 950 format. A genuine OTK spare part, sold individually.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0045.A0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVendor:\u003c\/strong\u003e OTK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e M8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Mini 950 rear hub wheel retention\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e Individually\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eChassis Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for OTK Mini 950 rear hubs. Not a direct replacement for the standard front and rear hub stud — see \u003ca href=\"\/products\/wheel-stud-long-1\"\u003eOTK Wheel Stud Long (0045.00)\u003c\/a\u003e for standard hubs. Used with the \u003ca href=\"\/products\/wheel-nut-k-nut-front-rear-1\"\u003eOTK K Nut (0044.B0)\u003c\/a\u003e.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448204366149,"sku":"OTK-HUB-0045-A0","price":0.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-wheel-stud-short-mini-950-rear-hub-b.jpg?v=1783087764"},{"product_id":"steering-wheel-rookie-900-tonykart-1","title":"OTK Steering Wheel Rookie 900 Tonykart","description":"\u003cp\u003eThe OTK Steering Wheel Rookie 900 is the factory-fit steering wheel for Tony Kart Rookie 900 and Micro Kart chassis. Smaller in diameter than the Mini (D33) and Senior (HGS) wheels, the Rookie 900 wheel is scaled to suit the youngest drivers in entry-level karting categories. The four-spoke design and high-grip coating follow the same OTK steering wheel standard across the full range, with the dimensions adjusted for smaller driver physiques.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Specifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 0083.U0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter diameter:\u003c\/strong\u003e 300mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle diameter:\u003c\/strong\u003e 32mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpokes:\u003c\/strong\u003e 4-spoke design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrip:\u003c\/strong\u003e High-grip rubber coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBranding:\u003c\/strong\u003e Tony Kart\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub fitment:\u003c\/strong\u003e OTK 20mm steering column\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eTony Kart:\u003c\/strong\u003e\u003cul\u003e\u003cli\u003eRookie 900 — Micro Kart variants\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThis is the Tony Kart \/ Rookie 900 version. For Kosmic Micro, see the \u003ca href=\"\/products\/kosmic-steering-wheel-micro\"\u003eKosmic Micro Steering Wheel\u003c\/a\u003e. For Exprit Micro, see the \u003ca href=\"\/products\/exprit-micro-steering-wheel\"\u003eExprit Micro Steering Wheel\u003c\/a\u003e. For Mini 950 \/ Cadet, see the \u003ca href=\"\/products\/tonykart-mini-steering-wheel-d-33mm-1\"\u003eTony Kart Mini Steering Wheel D.33mm\u003c\/a\u003e.\u003c\/em\u003e\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448207315269,"sku":"OTK-SW-0083-U0","price":179.82,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-steering-wheel-rookie-900-tonykart.jpg?v=1783087277"},{"product_id":"rear-bumper-m10-plastic-3-piece","title":"OTK Rear Bumper M10 Plastic 3 Piece","description":"\u003cp\u003eThe OTK Rear Bumper M10 (part 0312.D0) is the genuine three-piece plastic rear bumper for M10 chassis. Manufactured from OTK's CIK-FIA homologated polymer compound, the rear bumper is a primary contact point during racing and should be inspected regularly for cracks or deformation. The three-piece design allows individual sections to be replaced if only one section is damaged, reducing the cost of crash repairs.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0312.D0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Three-piece plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCIK Homologated:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e Fitting kit for 30mm chassis available separately (ref: 0312.A030KIT)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eRacer EVK — M10 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eMercury R — M10 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eNoesis R — M10 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eModels fitted with M10 rear bumper\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWorkshop Tip\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAfter any rear contact, flex the bumper by hand to check for hidden cracks along the mounting tabs before the next session. Individual replacement ends are also available — see \u003ca href=\"\/products\/otk-rear-bumper-ends-m10-single\"\u003eOTK Rear Bumper Ends M10 Single\u003c\/a\u003e.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448209805637,"sku":"OTK-BW-0312-D0","price":112.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-rear-bumper-m10-plastic-3-piece.jpg?v=1783087840"},{"product_id":"side-pod-m10-black","title":"OTK Side Pod M10 Black","description":"\u003cp\u003eThe OTK Side Pod M10 Black (part 0300.FDN) is the genuine OTK replacement side pod for M10 chassis, finished in gloss black. Manufactured from impact-resistant CIK-FIA approved polymer, the M10 side pod is symmetrical — the same pod fits both the left and right sides of the kart, simplifying spares management. The black finish is particularly popular for custom liveries and teams running a dark colour scheme.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0300.FDN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Gloss Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Symmetrical — same pod fits left and right\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCIK Homologated:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eRacer EVK — M10 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eMercury R — M10 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eNoesis R — M10 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eModels fitted with M10 side pods\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlso available in pearl white — see \u003ca href=\"\/products\/otk-side-pod-m10\"\u003eOTK Side Pod M10\u003c\/a\u003e. Fitting hardware sold separately — see the \u003ca href=\"\/collections\/bodywork\"\u003eBodywork\u003c\/a\u003e collection for mounting kits.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448209838405,"sku":"OTK-BW-0300-FDN","price":46.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-side-pod-m10-black.jpg?v=1783087840"},{"product_id":"side-pod-m10","title":"OTK Side Pod M10","description":"\u003cp\u003eThe OTK Side Pod M10 (part 0300.FDP) is the genuine OTK replacement side pod for M10 chassis, finished in pearl white. Manufactured from impact-resistant CIK-FIA approved polymer, the M10 side pod is symmetrical — the same pod fits both the left and right sides of the kart, simplifying spares management. Designed to absorb and distribute contact loads, helping to protect the chassis from direct impacts during racing.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0300.FDP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Pearl White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Symmetrical — same pod fits left and right\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCIK Homologated:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eRacer EVK — M10 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eMercury R — M10 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eNoesis R — M10 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eModels fitted with M10 side pods\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlso available in \u003ca href=\"\/products\/otk-side-pod-m10-black\"\u003eOTK Side Pod M10 Black\u003c\/a\u003e. Fitting hardware sold separately — see the \u003ca href=\"\/collections\/bodywork\"\u003eBodywork\u003c\/a\u003e collection for mounting kits.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448209871173,"sku":"OTK-BW-0300-FDP","price":46.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-side-pod-m10.jpg?v=1783087797"},{"product_id":"floor-tray-radiator-anti-vibration-rubber-insert","title":"OTK Floor Tray \u0026 Radiator Anti Vibration Rubber Insert","description":"\u003cp\u003eThe OTK Floor Tray \u0026amp; Radiator Anti-Vibration Rubber Insert (part 0093.04) is a genuine OTK rubber isolator designed to sit between the floor tray or radiator support and the chassis mounting point. The insert helps dampen vibration transmitted from the chassis into the bodywork and ancillaries, reducing wear on mounting hardware and helping to prevent cracking around fixing points over time.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0093.04\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Anti-vibration isolation insert\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Floor tray and radiator support mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eMultiple chassis generations using OTK floor tray system\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eModels using OTK floor tray and radiator support\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eModels using OTK floor tray and radiator support\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eModels using OTK floor tray and radiator support\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eSold individually. See also \u003ca href=\"\/products\/otk-floor-tray-radiator-support-anti-vibration-rubber\"\u003eOTK Floor Tray \u0026amp; Radiator Support Anti-Vibration Rubber (0093.02)\u003c\/a\u003e for the larger rubber support version.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448209903941,"sku":"OTK-BW-0093-04","price":0.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-floor-tray-radiator-anti-vibration-rubber-insert.jpg?v=1783087797"},{"product_id":"rear-bumper-ends-m10-single","title":"OTK Rear Bumper Ends M10 (Single)","description":"\u003cp\u003eThe OTK Rear Bumper End M10 (part 0312.D02) is the genuine OTK replacement end section for the M10 three-piece rear bumper. Sold individually, this part allows drivers to replace a damaged end section without purchasing an entire bumper assembly — reducing repair costs after side or corner contact. Manufactured from the same CIK-FIA homologated polymer as the full bumper set.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0312.D02\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold:\u003c\/strong\u003e Individually (single end piece)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCIK Homologated:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eRacer EVK — M10 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eMercury R — M10 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eNoesis R — M10 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eModels fitted with M10 rear bumper\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor the complete three-piece assembly, see \u003ca href=\"\/products\/otk-rear-bumper-m10-plastic-3-piece\"\u003eOTK Rear Bumper M10 Plastic 3 Piece\u003c\/a\u003e.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448210329925,"sku":"OTK-BW-0312-D02","price":21.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-rear-bumper-ends-m10-single.jpg?v=1783087840"},{"product_id":"floor-tray-radiator-support-anti-vibration-rubber","title":"OTK Floor Tray \u0026 Radiator Support Anti-Vibration Rubber","description":"\u003cp\u003eThe OTK Floor Tray \u0026amp; Radiator Support Anti-Vibration Rubber (part 0093.02) is a genuine OTK rubber buffer designed to sit between the floor tray or radiator support bracket and the chassis frame. Slightly larger than the 0093.04 insert, this part acts as a cushion that helps absorb chassis flex and vibration, protecting the mounting points and reducing the likelihood of stress cracking in the floor tray over time.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0093.02\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Anti-vibration support rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Floor tray and radiator support mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eMultiple chassis generations using OTK floor tray system\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eModels using OTK floor tray and radiator support\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eModels using OTK floor tray and radiator support\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eModels using OTK floor tray and radiator support\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eSold individually. See also \u003ca href=\"\/products\/otk-floor-tray-radiator-anti-vibration-rubber-insert\"\u003eOTK Floor Tray \u0026amp; Radiator Anti-Vibration Rubber Insert (0093.04)\u003c\/a\u003e for the smaller isolator insert version.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448210362693,"sku":"OTK-BW-0093-02","price":1.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-floor-tray-radiator-support-anti-vibration-rubber.jpg?v=1783087797"},{"product_id":"front-spoiler-kit-m7-blue","title":"OTK Front Spoiler Kit M7 Blue","description":"\u003cp\u003eThe OTK Front Spoiler Kit M7 Blue (part 0302.G0B) is the genuine OTK front spoiler and number board assembly for M7 chassis, finished in blue. The kit includes the front nassau pod and integrated number plate, both manufactured to CIK-FIA homologation standards. A popular colour choice for drivers running Tony Kart blue liveries on older M7 specification karts.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0302.G0B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Front nassau \/ spoiler and number board\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCIK Homologated:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eRacer EVK — M7 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eMercury R — M7 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eNoesis R — M7 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eModels fitted with M7 front bodywork\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlso available in \u003ca href=\"\/products\/otk-front-spoiler-kit-m7\"\u003ePearl\u003c\/a\u003e, \u003ca href=\"\/products\/otk-front-spoiler-kit-m7-red\"\u003eRed\u003c\/a\u003e, \u003ca href=\"\/products\/otk-front-spoiler-kit-m7-green\"\u003eGreen\u003c\/a\u003e, and \u003ca href=\"\/products\/otk-front-spoiler-kit-m7-light-blue\"\u003eLight Blue\u003c\/a\u003e.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448217112901,"sku":"OTK-BW-0302-G0B","price":80.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-front-spoiler-kit-m7-blue.jpg?v=1783087840"},{"product_id":"m10-plastic-rear-prortection-stickers","title":"OTK M10 Plastic Rear Protection Stickers","description":"\u003cp\u003eThe OTK M10 Plastic Rear Protection Stickers (part 0312.XDO) are genuine OTK adhesive protection stickers designed to apply to the surface of the M10 plastic rear bumper. The stickers help protect the bumper surface from scuffs and abrasion during racing contact, preserving the appearance of the bodywork and reducing surface degradation over time.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0312.XDO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e M10 plastic rear bumper surface protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eRacer EVK — M10 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eMercury R — M10 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eNoesis R — M10 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eModels fitted with M10 rear bumper\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor the bumper these stickers protect, see \u003ca href=\"\/products\/otk-rear-bumper-m10-plastic-3-piece\"\u003eOTK Rear Bumper M10 Plastic 3 Piece\u003c\/a\u003e.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448217538885,"sku":"OTK-BW-0312-XDO","price":12.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-m10-plastic-rear-prortection-stickers.jpg?v=1783087840"},{"product_id":"front-spoiler-kit-m7","title":"OTK Front Spoiler Kit M7","description":"\u003cp\u003eThe OTK Front Spoiler Kit M7 (part 0302.G0) is the genuine OTK front spoiler and number board assembly for M7 chassis, finished in pearl white. The kit includes the front nassau pod (lower spoiler section) and integrated number plate, both manufactured to CIK-FIA homologation standards. The M7 bodywork generation preceded the current M11, and replacement parts remain available for drivers racing or maintaining older karts.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0302.G0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Pearl White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Front nassau \/ spoiler and number board\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCIK Homologated:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eRacer EVK — M7 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eMercury R — M7 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eNoesis R — M7 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eModels fitted with M7 front bodywork\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlso available in \u003ca href=\"\/products\/otk-front-spoiler-kit-m7-blue\"\u003eBlue\u003c\/a\u003e, \u003ca href=\"\/products\/otk-front-spoiler-kit-m7-red\"\u003eRed\u003c\/a\u003e, \u003ca href=\"\/products\/otk-front-spoiler-kit-m7-green\"\u003eGreen\u003c\/a\u003e, and \u003ca href=\"\/products\/otk-front-spoiler-kit-m7-light-blue\"\u003eLight Blue\u003c\/a\u003e. For the yellow number board only, see \u003ca href=\"\/products\/otk-front-spoiler-yellow-m7-number-board\"\u003eOTK Front Spoiler Yellow M7 Number Board\u003c\/a\u003e.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448217571653,"sku":"OTK-BW-0302-G0","price":80.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-front-spoiler-kit-m7.jpg?v=1783087840"},{"product_id":"front-spoiler-kit-m7-red","title":"OTK Front Spoiler Kit M7 Red","description":"\u003cp\u003eThe OTK Front Spoiler Kit M7 Red (part 0302.G0R) is the genuine OTK front spoiler and number board assembly for M7 chassis, finished in red. The kit includes the front nassau pod and integrated number plate, both manufactured to CIK-FIA homologation standards. The red option suits Kosmic liveries and any custom red-themed kart running the M7 bodywork generation.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0302.G0R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Front nassau \/ spoiler and number board\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCIK Homologated:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eRacer EVK — M7 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eMercury R — M7 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eNoesis R — M7 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eModels fitted with M7 front bodywork\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlso available in \u003ca href=\"\/products\/otk-front-spoiler-kit-m7\"\u003ePearl\u003c\/a\u003e, \u003ca href=\"\/products\/otk-front-spoiler-kit-m7-blue\"\u003eBlue\u003c\/a\u003e, \u003ca href=\"\/products\/otk-front-spoiler-kit-m7-green\"\u003eGreen\u003c\/a\u003e, and \u003ca href=\"\/products\/otk-front-spoiler-kit-m7-light-blue\"\u003eLight Blue\u003c\/a\u003e.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448217604421,"sku":"OTK-BW-0302-G0R","price":80.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-front-spoiler-kit-m7-red.jpg?v=1783087840"},{"product_id":"front-spoiler-kit-m7-green","title":"OTK Front Spoiler Kit M7 Green","description":"\u003cp\u003eThe OTK Front Spoiler Kit M7 Green (part 0302.G0V) is the genuine OTK front spoiler and number board assembly for M7 chassis, finished in green. The kit includes the front nassau pod and integrated number plate, both manufactured to CIK-FIA homologation standards. Available for drivers maintaining or competing on older M7 specification karts.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0302.G0V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Green\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Front nassau \/ spoiler and number board\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCIK Homologated:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eRacer EVK — M7 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eMercury R — M7 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eNoesis R — M7 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eModels fitted with M7 front bodywork\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlso available in \u003ca href=\"\/products\/otk-front-spoiler-kit-m7\"\u003ePearl\u003c\/a\u003e, \u003ca href=\"\/products\/otk-front-spoiler-kit-m7-blue\"\u003eBlue\u003c\/a\u003e, \u003ca href=\"\/products\/otk-front-spoiler-kit-m7-red\"\u003eRed\u003c\/a\u003e, and \u003ca href=\"\/products\/otk-front-spoiler-kit-m7-light-blue\"\u003eLight Blue\u003c\/a\u003e.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448217637189,"sku":"OTK-BW-0302-G0V","price":80.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-front-spoiler-kit-m7-green.jpg?v=1783087840"},{"product_id":"front-spoiler-kit-m7-light-blue","title":"OTK Front Spoiler Kit M7 Light Blue","description":"\u003cp\u003eThe OTK Front Spoiler Kit M7 Light Blue (part 0302.G0A) is the genuine OTK front spoiler and number board assembly for M7 chassis, finished in light blue. The kit includes the front nassau pod and integrated number plate, both manufactured to CIK-FIA homologation standards. The light blue finish is a distinctive colour choice for drivers running Exprit or custom pastel-toned liveries on M7 specification karts.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0302.G0A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Light Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Front nassau \/ spoiler and number board\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCIK Homologated:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eRacer EVK — M7 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eMercury R — M7 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eNoesis R — M7 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eModels fitted with M7 front bodywork\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlso available in \u003ca href=\"\/products\/otk-front-spoiler-kit-m7\"\u003ePearl\u003c\/a\u003e, \u003ca href=\"\/products\/otk-front-spoiler-kit-m7-blue\"\u003eBlue\u003c\/a\u003e, \u003ca href=\"\/products\/otk-front-spoiler-kit-m7-red\"\u003eRed\u003c\/a\u003e, and \u003ca href=\"\/products\/otk-front-spoiler-kit-m7-green\"\u003eGreen\u003c\/a\u003e.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448217669957,"sku":"OTK-BW-0302-G0A","price":80.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-front-spoiler-kit-m7-light-blue.jpg?v=1783087840"},{"product_id":"front-spoiler-yellow-m7-number-board","title":"OTK Front Spoiler Yellow M7 Number Board","description":"\u003cp\u003eThe OTK Front Spoiler Yellow M7 Number Board (part 0302.G02) is the genuine OTK replacement yellow number board for the M7 front spoiler. Sold as a standalone board, this part allows drivers to replace a damaged or missing number plate section without replacing the entire nassau spoiler assembly. Manufactured to CIK-FIA homologation standards in the traditional yellow number board finish.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0302.G02\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Number board only (nassau spoiler sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCIK Homologated:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eRacer EVK — M7 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eMercury R — M7 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eNoesis R — M7 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eModels fitted with M7 front bodywork\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor the complete spoiler kit, see \u003ca href=\"\/products\/otk-front-spoiler-kit-m7\"\u003eOTK Front Spoiler Kit M7\u003c\/a\u003e. Note: the equivalent yellow number board for the M9 spoiler range is listed separately.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448223895877,"sku":"OTK-BW-0302-G02","price":36.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-front-spoiler-yellow-m7-number-board.jpg?v=1783087840"},{"product_id":"front-fairing-mk20-black","title":"OTK Front Fairing Mk20 Black","description":"\u003cp\u003eThe OTK Front Fairing Mk20 Black (part 0306.AEN) is the genuine OTK front fairing for the Mk20 Micro\/Rookie chassis, finished in gloss black. The Mk20 front fairing is designed for the smallest chassis class — fitting the Micro and Rookie categories — and is manufactured to CIK-FIA homologation standards. The gloss black finish offers a clean look for custom or team liveries at the youngest level of competition.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0306.AEN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Gloss Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Mk20 Micro \/ Rookie bodywork specification\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCIK Homologated:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eRacer — Micro \/ Rookie Mk20 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eMicro \/ Rookie models fitted with Mk20 front fairing\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eMicro \/ Rookie models fitted with Mk20 front fairing\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eMicro \/ Rookie models fitted with Mk20 front fairing\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlso available in pearl white — see \u003ca href=\"\/products\/otk-front-fairing-mk20\"\u003eOTK Front Fairing Mk20\u003c\/a\u003e. For Mk20 side pods, see \u003ca href=\"\/products\/otk-side-pod-mk20\"\u003eOTK Side Pod Mk20\u003c\/a\u003e.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448224190789,"sku":"OTK-BW-0306-AEN","price":53.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-front-fairing-mk20-black.jpg?v=1783087880"},{"product_id":"front-fairing-m9-black","title":"OTK Front Fairing M9 Black","description":"\u003cp\u003eThe OTK Front Fairing M9 Black (part 0306.AGN) is the genuine OTK replacement front fairing for M9 Mini Kart chassis, finished in gloss black. The M9 front fairing is the CIK-homologated nose cone assembly that covers the steering column and front end of the kart, providing aerodynamic profiling and driver protection. Designed specifically for the M9 Mini Kart bodywork specification, which is used across the junior and cadet classes.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0306.AGN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Gloss Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e M9 Mini Kart bodywork specification\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCIK Homologated:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eRacer — Mini Kart \/ M9 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eMini models fitted with M9 front fairing\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eMini models fitted with M9 front fairing\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eMini models fitted with M9 front fairing\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlso available in pearl white — see \u003ca href=\"\/products\/otk-front-fairing-m9-2025-mini-kart\"\u003eOTK Front Fairing M9 2025 Mini Kart\u003c\/a\u003e. For the M9 front spoiler kits, see the \u003ca href=\"\/collections\/bodywork\"\u003eBodywork\u003c\/a\u003e collection.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448224223557,"sku":"OTK-BW-0306-AGN","price":44.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-front-fairing-m9-black.jpg?v=1783087880"},{"product_id":"front-fairing-mk20","title":"OTK Front Fairing Mk20","description":"\u003cp\u003eThe OTK Front Fairing Mk20 (part 0306.AEP) is the genuine OTK front fairing for the Mk20 Micro\/Rookie chassis, finished in pearl white. Designed for the smallest chassis class in the OTK range — covering Micro and Rookie categories — this fairing is manufactured to CIK-FIA homologation standards and provides the aerodynamic nose cone profile specific to the compact Mk20 chassis geometry.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0306.AEP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Pearl White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Mk20 Micro \/ Rookie bodywork specification\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCIK Homologated:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eRacer — Micro \/ Rookie Mk20 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eMicro \/ Rookie models fitted with Mk20 front fairing\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eMicro \/ Rookie models fitted with Mk20 front fairing\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eMicro \/ Rookie models fitted with Mk20 front fairing\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlso available in gloss black — see \u003ca href=\"\/products\/otk-front-fairing-mk20-black\"\u003eOTK Front Fairing Mk20 Black\u003c\/a\u003e. For the matching side pod, see \u003ca href=\"\/products\/otk-side-pod-mk20\"\u003eOTK Side Pod Mk20\u003c\/a\u003e.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448224256325,"sku":"OTK-BW-0306-AEP","price":53.51,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-front-fairing-mk20.jpg?v=1783087880"},{"product_id":"front-fairing-otk-m9-2025-mini-kart","title":"OTK Front Fairing M9 2025 Mini Kart","description":"\u003cp\u003eThe OTK Front Fairing M9 2025 Mini Kart (part 0306.AGP) is the genuine OTK pearl white front fairing for M9 Mini Kart chassis. This is the nose cone only — fairing support brackets are sold separately. Manufactured to CIK-FIA homologation standards, the M9 fairing fits the smaller Mini Kart chassis and is current specification for 2025 competition.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0306.AGP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Pearl White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e Nose cone only — support brackets sold separately\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCIK Homologated:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eRacer — Mini Kart \/ M9 bodywork specification\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eMini models fitted with M9 front fairing\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eMini models fitted with M9 front fairing\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed\u003c\/strong\u003e\n  \u003cul\u003e\n  \u003cli\u003eMini models fitted with M9 front fairing\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlso available in gloss black — see \u003ca href=\"\/products\/otk-front-fairing-m9-black\"\u003eOTK Front Fairing M9 Black\u003c\/a\u003e. For M9 front spoiler kits, see the \u003ca href=\"\/collections\/bodywork\"\u003eBodywork\u003c\/a\u003e collection.\u003c\/p\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448224289093,"sku":"OTK-BW-0306-AGP","price":44.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-front-fairing-m9-2025-mini-kart.jpg?v=1783087880"},{"product_id":"engine-mount-drilled-ally-flat-mini-28x92mm","title":"OTK Engine Mount Drilled Ally Flat Mini 28x92mm","description":"\u003cp\u003eThe \u003cstrong\u003eOTK Aluminium Mini Engine Mount Drilled 28x92mm\u003c\/strong\u003e (part number 0038.AB) is a genuine OTK flat aluminium engine mount designed for Mini Kart and Cadet chassis. It is used to position and secure the engine on the chassis and provides the fixed mounting point between the engine clamps and the engine plate. This version is pre-drilled for common Mini Kart engine installations and is designed for chassis with 28mm main tubes and the standard OTK 92mm rail spacing.\u003c\/p\u003e\n\n\u003cp\u003eThe engine mount is a key structural component of any kart drivetrain setup. It determines the position of the engine relative to the axle and directly influences chain line, chain tension and overall drive efficiency. Using the correct genuine OTK mount for your chassis tube diameter and engine specification ensures the engine is held securely and the drive system runs as intended.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0038.AB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Flat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling:\u003c\/strong\u003e Pre-drilled for Mini Kart engine fitment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis tube diameter:\u003c\/strong\u003e 28mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail spacing (centre-to-centre):\u003c\/strong\u003e 92mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGenuine OTK spare part\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Sold individually (clamps not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart\u003c\/strong\u003e — Mini Kart and Cadet chassis with 28mm tubes and 92mm rail spacing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic\u003c\/strong\u003e — Mini Kart and Cadet chassis with 28mm tubes and 92mm rail spacing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit\u003c\/strong\u003e — Mini Kart and Cadet chassis with 28mm tubes and 92mm rail spacing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed\u003c\/strong\u003e — Mini Kart and Cadet chassis with 28mm tubes and 92mm rail spacing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLN Kart\u003c\/strong\u003e — Mini Kart and Cadet chassis with 28mm tubes and 92mm rail spacing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGillard\u003c\/strong\u003e — Mini Kart and Cadet chassis with 28mm tubes and 92mm rail spacing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCS55\u003c\/strong\u003e — Mini Kart and Cadet chassis with 28mm tubes and 92mm rail spacing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eBuying Advice\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEngine mounts are chassis and tube-diameter specific. Before ordering, confirm your chassis main tube diameter (28mm for Mini\/Cadet, 30mm for Senior) and the rail spacing (OTK chassis use 92mm centre-to-centre). Also confirm the engine class you are running, as different engines may require different bolt hole patterns. This mount does not include clamps — see the OTK engine mount clamp range for compatible clamps to complete your installation.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/engine-mount-clamp-1-screw-92x28mm\"\u003eOTK Engine Mount Clamp 1 Screw 92x28mm\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/engine-mount-clamp-1-screw-92x28mm-full-clamp\"\u003eOTK Engine Mount Clamp 1 Screw 92x28mm Full Clamp\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/chain-stretcher-m10-std\"\u003eOTK Chain Stretcher M10 Long 100cc (0110.B0)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448224813381,"sku":"OTK-EM-0038-AB","price":50.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-engine-mount-drilled-ally-flat-mini-28x92mm.jpg?v=1783087443"},{"product_id":"engine-mount-al-92mm-rtx-drilled","title":"OTK Engine Mount AL 92mm RTX Drilled","description":"\u003cp\u003eThe \u003cstrong\u003eOTK Aluminium Engine Mount 92mm Flat Drilled\u003c\/strong\u003e (part number 0038.AAF) is a genuine OTK flat aluminium engine mounting plate designed for Senior kart chassis running Rotax Max and IAME X30 engines. It is pre-drilled to suit the bolt patterns of these popular engine classes and is designed for OTK chassis with 92mm rail spacing. The engine mount provides the structural platform between the chassis tubes and the engine, and is secured in position using OTK engine mount clamps.\u003c\/p\u003e\n\n\u003cp\u003eThe engine mount plate determines how the engine sits relative to the axle, influencing chain line alignment, chain tension and ultimately drive efficiency. A correctly specified mount for your engine and chassis combination ensures the engine is seated at the correct height and angle, allowing the chain to run true and the drive system to operate efficiently throughout a race weekend.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0038.AAF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Flat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling:\u003c\/strong\u003e Pre-drilled for Rotax Max and IAME X30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail spacing (centre-to-centre):\u003c\/strong\u003e 92mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGenuine OTK spare part\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Sold individually (clamps not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart\u003c\/strong\u003e — Senior OK chassis with 92mm rail spacing, running Rotax Max or IAME X30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic\u003c\/strong\u003e — Senior OK chassis with 92mm rail spacing, running Rotax Max or IAME X30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit\u003c\/strong\u003e — Senior OK chassis with 92mm rail spacing, running Rotax Max or IAME X30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed\u003c\/strong\u003e — Senior OK chassis with 92mm rail spacing, running Rotax Max or IAME X30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLN Kart\u003c\/strong\u003e — Senior OK chassis with 92mm rail spacing, running Rotax Max or IAME X30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGillard\u003c\/strong\u003e — Senior OK chassis with 92mm rail spacing, running Rotax Max or IAME X30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCS55\u003c\/strong\u003e — Senior OK chassis with 92mm rail spacing, running Rotax Max or IAME X30\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eBuying Advice\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConfirm your chassis rail spacing (OTK is 92mm centre-to-centre) and your engine class before ordering. Engine mounts are not universal — the bolt hole pattern must match your specific engine. This mount is pre-drilled for Rotax Max and IAME X30. If you are running a different engine class, check the available OTK mount variants. Clamps are sold separately.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/engine-mount-clamp-1-screw-92x30mm\"\u003eOTK Engine Mount Clamp 1 Screw 92x30mm\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/engine-mount-clamp-cut-2-screws-92x30mm\"\u003eOTK Engine Mount Clamp Cut 2 Screws 92x30mm\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/chain-stretcher-m10-std\"\u003eOTK Chain Stretcher M10 Long 100cc (0110.B0)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448224846149,"sku":"OTK-EM-0038-AAF","price":54.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-engine-mount-al-92mm-rtx-drilled.jpg?v=1783087443"},{"product_id":"engine-mount-flat-double-drilled-x30-mg-30x92mm","title":"OTK Engine Mount Flat Double Drilled X30 MG 30x92mm","description":"\u003cp\u003eThe \u003cstrong\u003eOTK Magnesium Engine Mount Flat Double Drilled 30x92mm\u003c\/strong\u003e (part number 0038.D0EF) is a genuine OTK flat magnesium engine mounting plate for Senior kart chassis. This version features a double-drilled bolt hole pattern, making it compatible with both IAME X30 and Rotax Max engine classes without requiring additional machining. It is designed for OTK chassis with 30mm main tubes and 92mm rail spacing.\u003c\/p\u003e\n\n\u003cp\u003eThe magnesium construction offers a weight saving over aluminium alternatives while retaining the rigidity required for competitive racing. The double-drilled pattern provides additional flexibility when switching between engine classes, as both hole positions are pre-machined to the correct specifications. This makes it a practical choice for teams running more than one engine class on the same chassis.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0038.D0EF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Magnesium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Flat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling:\u003c\/strong\u003e Double-drilled — IAME X30 and Rotax Max compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis tube diameter:\u003c\/strong\u003e 30mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail spacing (centre-to-centre):\u003c\/strong\u003e 92mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGenuine OTK spare part\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Sold individually (clamps not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart\u003c\/strong\u003e — Senior OK chassis with 30mm tubes and 92mm rail spacing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic\u003c\/strong\u003e — Senior OK chassis with 30mm tubes and 92mm rail spacing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit\u003c\/strong\u003e — Senior OK chassis with 30mm tubes and 92mm rail spacing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed\u003c\/strong\u003e — Senior OK chassis with 30mm tubes and 92mm rail spacing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLN Kart\u003c\/strong\u003e — Senior OK chassis with 30mm tubes and 92mm rail spacing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGillard\u003c\/strong\u003e — Senior OK chassis with 30mm tubes and 92mm rail spacing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCS55\u003c\/strong\u003e — Senior OK chassis with 30mm tubes and 92mm rail spacing\u003c\/li\u003e\n\u003cli\u003eCompatible with IAME X30 and Rotax Max engine bolt patterns\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eBuying Advice\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the double-drilled flat version suitable for both X30 and Rotax Max. If you require an inclined mount for a different engine position, see the OTK Inclined Magnesium Engine Mount (0038.D0DF). Clamps are sold separately — for 30mm tube diameter, see the OTK 92x30mm clamp range.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/engine-mount-inclined-rotax-x30-mg-92x30\"\u003eOTK Engine Mount Inclined Rotax \u0026amp; X30 MG 92x30 (0038.D0DF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/engine-mount-clamp-1-screw-92x30mm\"\u003eOTK Engine Mount Clamp 1 Screw 92x30mm\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/chain-stretcher-m10-std\"\u003eOTK Chain Stretcher M10 Long 100cc (0110.B0)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448224878917,"sku":"OTK-EM-0038-D0EF","price":100.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-engine-mount-flat-double-drilled-x30-mg-30x92mm.jpg?v=1783087443"},{"product_id":"engine-mount-inclined-rotax-x30-mg-92x30","title":"OTK Engine Mount - Inclined- Rotax \u0026 X30 MG 92x30","description":"\u003cp\u003eThe \u003cstrong\u003eOTK Magnesium Engine Mount Inclined Rotax \u0026amp; X30 92x30mm\u003c\/strong\u003e (part number 0038.D0DF) is a genuine OTK inclined magnesium engine mounting plate designed for Senior OK kart chassis. The inclined profile positions the engine at a slight angle relative to the chassis, which can assist with exhaust routing and improve engine breathing on certain engine and chassis combinations. This version is designed for OTK chassis with 30mm main tubes and 92mm rail spacing, and is compatible with Rotax Max and IAME X30 engine bolt patterns.\u003c\/p\u003e\n\n\u003cp\u003eThe choice between a flat and inclined engine mount is a setup decision that can affect engine performance, exhaust clearance and chain line. The inclined mount is commonly used where a slight forward tilt of the engine improves carburation, intake routing or thermal management. OTK offers both flat (0038.D0EF) and inclined (0038.D0DF) magnesium mounts in the same dimension to give teams flexibility in their setup approach.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTK Part Number:\u003c\/strong\u003e 0038.D0DF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Magnesium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Inclined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling:\u003c\/strong\u003e Pre-drilled for Rotax Max and IAME X30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis tube diameter:\u003c\/strong\u003e 30mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail spacing (centre-to-centre):\u003c\/strong\u003e 92mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGenuine OTK spare part\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Sold individually (clamps not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTony Kart\u003c\/strong\u003e — Senior OK chassis with 30mm tubes and 92mm rail spacing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKosmic\u003c\/strong\u003e — Senior OK chassis with 30mm tubes and 92mm rail spacing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExprit\u003c\/strong\u003e — Senior OK chassis with 30mm tubes and 92mm rail spacing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedspeed\u003c\/strong\u003e — Senior OK chassis with 30mm tubes and 92mm rail spacing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLN Kart\u003c\/strong\u003e — Senior OK chassis with 30mm tubes and 92mm rail spacing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGillard\u003c\/strong\u003e — Senior OK chassis with 30mm tubes and 92mm rail spacing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCS55\u003c\/strong\u003e — Senior OK chassis with 30mm tubes and 92mm rail spacing\u003c\/li\u003e\n\u003cli\u003eCompatible with Rotax Max and IAME X30 engine bolt patterns\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eSetup Note\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe inclined engine mount is a deliberate setup choice rather than a universal fitment. If you are unsure whether flat or inclined is correct for your engine and chassis combination, consult your engine documentation or check with your mechanic before ordering.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/engine-mount-flat-double-drilled-x30-mg-30x92mm\"\u003eOTK Engine Mount Flat Double Drilled X30 MG 30x92mm (0038.D0EF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/engine-mount-clamp-1-screw-92x30mm\"\u003eOTK Engine Mount Clamp 1 Screw 92x30mm\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/chain-stretcher-m10-std\"\u003eOTK Chain Stretcher M10 Long 100cc (0110.B0)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OTK","offers":[{"title":"Default Title","offer_id":58448224911685,"sku":"OTK-EM-0038-D0DF","price":100.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/2785\/6709\/files\/otk-engine-mount-inclined-rotax-x30-mg-92x30.jpg?v=1783087443"}],"url":"https:\/\/thekartstore.com\/collections\/tony-kart.oembed","provider":"IC Kartstore","version":"1.0","type":"link"}